bafang bbs02 review

When you purchase through links on our website, we may earn a commission. Affiliate disclosure.

E-bike conversion kits remain popular in 2023, and the Bafang BBS02 is still a favourite amongst DIY electric bike enthusiasts. This comprehensive review examines this popular option’s installation, motor performance, and potential problems. All the information in this Bafang BBS02 review has been gathered from 3 years of experience installing, servicing and test riding. Find out more about my electric bike conversion service.

Skip to product specifications.

Key features

  • 750w nominal power with 1200w peak power (48v battery)
  • Compatible with most frames (BSA threaded bottom bracket)
  • Kit includes all mounting accessories
  • It can be programmed with an optional USB cable and software.

What’s included in the kit?

The Bafang BBS02B comes as a kit with several accessories and fixings. The kit’s contents may vary between suppliers, as some will add extras like a lockring spanner and a gearshift sensor. Below is a list of what is usually included.

  • Bafang BBS02B motor
  • Display
  • Wiring Harness
  • Inner and outer lockrings
  • Mounting plate
  • Allen bolts and spacers
  • Speed sensor and wheel magnet
  • Brake cut-off sensors
Bafang BBS02 e-bike conversion kit with all accessories
The Bafang BBS02B conversion kit with included accessories

Installation

The Bafang BBS02B will only fit bicycles that use a BSA threaded bottom bracket. These measure 68 mm-73 mm across the frame and have an internal diameter of approximately 33.5mm. If your bike has a press-fit (see below) or another type of BB, I would seriously consider a compatible donor bike, as it will make installation much more straightforward.

will the bafang bbs02 fit any bike

I would not attempt to install the BBS02B on a bike with a press-fit bottom bracket. Although, in some cases, this may be possible with some ingenuity. A normal reducer shim may not be sufficient, as there’s unlikely to be enough clearance between the motor axle and housing (to clear the BB shell). You would need to machine an eccentric shim for this to be possible.

Many modern mountain bikes (and some adventure bikes) have boost rear hub spacing (148mm) to accommodate the commonly used wider tyres. The problem is that the steep chainstay angle can prevent the motor axle from fitting in the bottom bracket shell. There’s no easy way around this, and I would stick with 135 mm-142 mm rear hub bikes.

I have previously installed the BBS02 and BBSHD on carbon fibre frames without any long-term issues. But most modern carbon bikes have a press-fit bottom bracket or a beefed-up bottom bracket area. This may make installation very tricky. I wouldn’t advise this and recommend finding a good aluminium framed donor bike.

The Bafang BBS02 is straightforward enough to install if you have the right tools and are comfortable working on a bicycle. The hardest part would be to remove the bottom bracket bearing. This can be very hard on older bikes, and you will want a long breaker bar (and a lot of patience).

removing bottom bracket
Removing the bottom bracket usually requires a breaker bar

Once the bottom bracket has been removed, thoroughly clean the area, ready to fit the motor shaft. Providing your bike is compatible, this should be fairly straightforward. You may need to remove the cable guide (if you have one) underneath the BB shell, as this might interfere with motor fitment. Also, in some cases, you may need to file down any burrs where the frame tubes meet the BB shell (internally).

bafang bbs02 installed in bottom bracket

When the motor is in place and the lockrings tightened, then it’s just a case of fitting the display, speed sensor, battery and brake sensors (if needed). Finally, tidying up the excess cabling can take a bit of time, but it’s worth doing to give a professional finish to your e-bike. I have included a Bafang BBS02 installation manual in my resources section for more information on the process.

Motor performance

The Bafang BBS02B 750w offers remarkable performance for the price. I’ve yet to come across one person who isn’t impressed by the power level. Depending on gearing, it’s possible to reach speeds of over 30 mph on the flat with electric assistance. Hill climbing is its forte – the BBS02 will eat 25% hills for breakfast!

The latest Bafang BBS02B is available in three configurations: 36v 500w / 48v 500w and 48v 750w. The only difference between these variants is the controller (36v / 48v) and firmware settings. The 750w version is the most popular, offering the most bang for your buck! Externally, the motor is the same as the lower-powered BBS01 250w / 350w, the only difference being the internals and controller.

Bafang ModelBatteryPeak Power (Watts)
BBS02 500w 36v36v (42.2v x 25A)1055w
BBS02 500w 48v48v (54.4v x 18A)864w
BBS02 500w 52v52v (58.8v x 18A)1058w
BBS02 750w 48v48v (54.4v x 25A)1200w
BBS02 750w 52v52v (58.8v x 25A)1470w
The voltage figures in brackets are for a fully charged battery. Note: As the voltage drops, so will the power.

You can use a 52v battery with the Bafang BBS02B. But there are pros and cons to going down this route. A 52v battery, when fully charged, is at 58.8v; this is very close to the motor controller’s maximum operating voltage of 60v. Below are some key facts to consider.

  • A higher maximum voltage equals a bit more peak power.
  • You can achieve the same power as a 48v battery but with a low current (amps). I did this with my Bafang conversion, and I had over 2000 miles of trouble-free use.
  • Because the start voltage is higher, the performance drop-off isn’t as noticeable as with a 48v.
  • Most controller failures I experienced were on bikes fitted with a 52v battery.

I would advise sticking with a 48v battery, which is 54.4v fully charged. I rarely had any issues with the motors that used 48v batteries. If you prefer to fit a 52v battery, I would lower the peak current to 22A. I had mine at 18A, and it still went very well.

boardman mtb fitted with bafang bbs02b

Bafang BBS02 common problems

Bafang motors are generally reliable. But, like any mass-produced electrical item, problems do occur from time to time. I have done Bafang conversions, which are still going strong after 4 years and over 5000 miles. The flip side is that I’ve also had a fair share of issues.

is the bafang bbs02 reliable

Below, I have listed some common faults experienced with the Bafang BBS02 over the last few years. Some of these problems seem to result from random manufacturing defects, and others may be caused by misuse.

Controller failure

This is one of the most common problems I’ve encountered with the BBS02B 750w. It may be accompanied by an error code (see below). Sometimes, the motor will stop working but will still switch on. If you grab the rear wheel and spin it backwards, if there’s significant resistance, this can indicate a blown controller.

bafang bbs02b controller

Controller failure can happen for several reasons, and there are things you can do to prevent this from happening. In some instances, there may be a manufacturing defect that quality control has missed.

  1. Never pull away in top gear whilst in full power mode. You should always select a lower power setting and be in the lowest gear. Treat the same as you would a motorcycle or car, and always select a low gear for pulling away.
  2. Modify controller settings. You can dial back the start current and maximum peak current. I had mine set to 18A with a lower start current and never had a single problem in over 2000 miles of use.
  3. Don’t use a throttle. A throttle is okay to use when you’re already riding along at a few miles an hour. But treating it like an electric moped and using the throttle constantly without pedalling will lead to problems.
  4. Try to avoid water. Although the Bafang is water resistant, it’s not waterproof. Any prolonged immersion in water or using a power wash to clean it is asking for trouble (I know this from personal experience). Even leaving it out in heavy rain can cause problems.
  5. Stick with a 48v battery. Fitting a 52v battery does have its benefits. But most of the controller failures I’ve dealt with were on bikes fitted with a 52v battery.

Replacement Bafang controllers are available from Amazon

Speed sensor problems

This is another common fault and is usually easy to rectify. You will likely get a 21 error code. Below, I’ve listed some causes of issues with the speed sensor.

bafang speed sensor
  1. Faulty or damaged sensor. The sensor is quite vulnerable to knocks and can be easily damaged. Replacements are very cheap and easily available.
  2. Bad connection. Check the connector plug; it should be screwed in firmly. Make sure the connector pins are not bent.
  3. Misalignment. Make sure the wheel magnet lines up with the arrow on the sensor.
  4. The gap between the sensor and magnet. Ideally, the gap should be between 2mm and 5mm; any more or less can cause problems.

Replacement Speed sensors are available from Amazon

Pedal sensor problems

If the pedal assist isn’t working, but the throttle is working fine, that points to a problem with the pedal assist circuit. Unfortunately, as the PAS sensor is internal, it usually requires motor disassembly to fix. I have listed some of the possible causes below.

bafang pas magnet ring
  1. Controller connector plug. Sometimes, the plug that connects the controller to the PAS circuit is not properly connected. You must remove the controller and check the connection and connector pins.
  2. Faulty PAS circuit board. This may be a manufacturing defect like a poor solder. Replacements are very cheap, but you will need soldering skills.
  3. Broke PAS sensor magnet ring. It’s another fairly cheap fix, but you must disassemble the motor to do the job.

Hall sensor problems

A hall sensor provides rotor position feedback to the controller. If one or more hall sensors become defective, it will affect your motor’s running. You may get an error code 08 on your display, usually accompanied by a loss of power and a grumbling sound.

bafang hall sensor

You will need to disassemble the motor to inspect the sensors visually. Sometimes, a poor solder can cause the problem, or they can fail. Either way, you must be a competent solderer to repair yourself. The sensors themselves are very cheap and easy to get.

Wiring harness problems

This problem is often accompanied by an error code 30 and can be caused by a poor connection, damaged wiring harness or bent connector pins. It may result in complete loss of power or the malfunction of other components like the display or speed sensor.

Replacement Bafang wiring harness available from Amazon

bafang wiring harness

List of Bafang error codes

  • 05 Throttle abnormality
  • 06 Low voltage protection
  • 07 High voltage protection
  • 08 Hall sensor abnormality
  • 09 Phase line abnormality
  • 10 Controller overheating
  • 11 Temperature sensor abnormality (in the controller)
  • 12 Current sensor abnormality
  • 13 Stator overheating
  • 14 Temperature sensor abnormality (in motor)
  • 21 Speed sensor abnormality
  • 22 Communication abnormality in BMS (battery management system)
  • 23 Front light abnormality
  • 24 Front light sensor abnormality
  • 30 Communication in system abnormality (wiring harness or connections)

A bike converted to electric using a Bafang BBS02B, may not be legal to use on public roads in some countries. This depends on your local e-bike laws. If you’re unfamiliar with your country’s e-bike law, it’s advisable to check beforehand. In the US, federal law allows for 750w e-bikes. But, in the UK, EU and Australia, the maximum continuous power is limited to 250w (peak power can be higher, but the continuous rating is important).

is the bafang bbs02 legal

A Bafang BBS02B 750w is rated to 750w continuous, with a peak power output of up to 1470w (with a 52v battery fitted). If you are in the UK and planning on using this on private land, that is fine, but if you are going to use it on public roads, then you should be aware of the potential legal implications first. Please read my article on UK/EU electric bike law.

Which is the best Bafang display?

When the Bafang BBS02 was first released in 2015, there were only a couple of displays to choose from. Nowadays, you are spoiled for choice. Below, I have listed the 5 best Bafang displays suitable for the BBS02B.

best bafang displays dp-c18 500c and c965
  • P850C  This colour 3.2″  display has been around for a few years but has continued to be a popular option. It has great functionality and is one of the more affordable options.
  • 500c If you want a smaller display mounted near the left-hand grip, the 500c ticks all the right boxes. It has most of the functionality of the P850c but in a more compact size.
  • SW102 The smallest available Bafang display is ideal for riders who want a small but functional display.
  • DP-C18 This display is made by Bafang and is used on a lot of factory e-bikes. It’s the most expensive of the bunch but is very high quality and has added functionality.
  • C965 is The oldest of the displays here. The C965 has been around since the beginning (2015) and is still quite popular due to its simplicity and minimalist design.

Bafang displays are available from Amazon

p850c display on boardman mtb bafang conversion

Programming the Bafang BBS02

One of the great things about the BBS02 is the ease by which it can be programmed. This doesn’t mean programming in the classic sense, more like re-configuring the controller parameters to better suit your needs and environment. Most e-bike controllers can be re-programmed, but none are as straightforward as the Bafang.

bafang usb programming lead
Bafang USB Programming Cable

It doesn’t cost a lot of money to get started. You’ll need a laptop or desktop PC, a USB programming lead and a copy of the free Bafang config tool. I won’t go into too much detail here as there’s enough info for a separate article. I’ll just cover the basics of what can be done.

  • Low Battery Protect (volts): This can be changed if you’re using a 52v battery. It shouldn’t be set too low, as although the battery BMS will override this, it’s not worth risking over-discharging the battery and potentially damaging the cells.
  • Limited Current (amps): On a stock motor, this is usually set to 25 amps and cannot be raised any higher. I usually lower this to 18A, which will reduce the peak power but can improve controller reliability.
  • Start Current (%): You should either leave this alone or lower it slightly. If set too high, you run the risk of blowing the controller. Setting this lower is great for a smoother start-up and particularly good if you’re using an internally geared hub.
  • Slow Start Mode (1-8): This setting determines how quickly the power ramps up on start-up. I would leave this, as being set too low can potentially blow the controller, and too high results in a jerky pedal assist (when starting pedalling).
  • Time of Stop (x10ms): This determines how quickly the motor shuts off after pedalling stops. I sometimes find out of the box this is set too high (25ms); I usually reduce this to 10ms, which means the motor shuts off instantly.
  • Keep Current (%): This setting reduces the current down to the set percentage of the current PAS level based on your pedalling cadence. You will get 100% at a lower cadence, but as your pedalling rpm increases, the power is backed off to the percentage set (e.g. 70%). I have found that this is set as low as 40% on some motors, which is way too low. I usually set this to 70%.
bafang programming screenshot

You can also set pedal assist speed and current for each possible assist level (up to nine). Plus, there are many more settings you can change. For more information, I can highly recommend the electricbike-blog for the most in-depth Bafang programming guide online.

Bafang USB programming cables are available from Amazon

Bafang BBS02 alternatives

For the price, there’s not much out there that can compare with the BBS02 when it comes to the sheer fun factor and versatility. It depends on what you’re looking for in an e-bike motor.

If you want an electric bike system that’s going to take you up the steepest hill and push you along at a swift pace without fuss, then the BBS02 is for you. If, however, you want a motor that’s going to amplify your effort and give you a bit of a workout at the same time. Then, the Tongsheng TSDZ2 is going to be a better option. Read the BBS02 vs TSDZ2 comparison article.

bafang bbs02 alternative

If you need a motor for real heavy-duty applications like carrying cargo or trailers, then it would be worth paying the extra and buying a BBSHD. It’s a real beast of a motor and is reliable to boot! More reliability, robust internals and bags of torque. Read my BBS02 vs BBSHD article.

FAQs

Will the Bafang BBS02 fit any bike?

You can only use the BBS02 on a bike with a 68 mm-73 mm threaded bottom bracket.

Is the Bafang BBS02 waterproof?

It is not 100% waterproof. Riding in the rain is okay, but very heavy rain and deep puddles are best avoided.

How do I choose the right chainring size?

If you are riding off-road, regularly riding up steep hills or towing a trailer, a smaller chainring the better. If you are looking for better top speed, then you will want a larger chainring.

What is the top speed of a Bafang BBS02?

The maximum possible speed will vary depending on your bike’s gearing. Most users report a top-assisted speed of between 28-32 mph.

What battery should I use?

I would personally stick with a 48v, although there are benefits to using a 52v battery.

Can I use a BBS02 conversion off-road?

Yes, the BBS02 is suitable for off-road use, but you will need to watch out for rocks and other potential hazards that could damage the exposed motor.

Does the Bafang BBS02 come with a warranty?

Most re-sellers offer a 12-month warranty with the Bafang BBS02, but warranty claims can often be complicated and not straightforward. This varies greatly between suppliers, and you should always buy from a reputable source (always check customer reviews).

Are mid-drive motors better than hub motors?

No, they have different performance characteristics and may suit certain riding applications better. There are lots of pros and cons of hub motors vs mid-drive motors. It comes down to your budget and needs.

Pros and Cons

Pros

  • Great performance
  • Smooth and Quiet
  • Programmable
  • Compatible with most older bikes

Cons

  • Installation can be challenging
  • Potential long-term reliability issues
  • Not road legal in some countries (UK/EU)
  • Heavy
boardman mountain bike with bafang bbs02b conversion

Conclusion

Seven years after its launch, the Bafang BBS02B continues to be one of the best e-bike conversion kits available. For the price, there’s nothing to touch it. The nearest competitor is the Tongsheng TSDZ2, and that’s a pussycat in comparison!

You won’t find this much torque, power and versatility in any other conversion kit for the price. Sure, if you can stump up an extra couple of hundred, then I’d seriously consider the BBSHD. But, do you need that much power?

Despite some reliability problems, Bafang has been constantly making minor tweaks to this motor over the years. It’s possible to get very high mileage from the BBS02 with sensible use and periodic maintenance.

Apart from some of the electrical issues, my only other complaint would be the pedal assist. This can be fine-tuned using the software, but out of the box, it can have a very on/off feel to it. It’s a shame Bafang didn’t make an upgraded version with a torque sensor, as that would have taken the BBS02 to another level. To date, this feature is only available on their ‘M’ models, which require a special frame for fitment.

All in all, I still love the Bafang BBS02, and in 2022 / 2023, it’s still one of the best e-bike conversion options available and highly recommended!

Specifications

  • Motor Position: Mid-Mounted (Bottom Bracket)
  • Motor Compatibility: 68-73mm BSA Threaded Bottom Bracket
  • Rated Motor Power: 500 watts to 750 watts
  • Motor Peak Power: 864 watts to 1470 watts
  • Max Torque: 120Nm
  • Rated Voltage: 36-volt or 48-volt (52v Battery Optional)
  • Controller Current: 18-25-amps
  • IP Rating: IP65
  • Price: $350 – $450

Thanks for reading my Bafang BBS02 review. If you have any questions about the Bafang motor, please feel free to leave a message in the comments section below. Or head on over to my BBS02 Forum, where there’s an archive of over 300 posts from the last 4-years.

Similar Posts

35 Comments

  1. Bonjour,
    Merci pour votre contenu , je le trouve vraiment votre contenu l’un des plus complet d’internet à ce sujet. Je vais m’acheter le Bafang de 750 watts et j’hésite entre la batterie 48v 20ah ou 52V19.2ah.
    J’ai vu que vous préconisez le 48v malgré les avantages du 52v. Je voulais avoir le 52V19.2ah pour avoir plus de batterie et plus de puissance, a-t-il une vrai différence de puissance sur les montées et aussi sur l’autonomie? le 52v fait 19,2 ah , j’ai cru comprendre que vous avez eu un 52v 19ah et vous n’avez pas eu trop de problème?
    Pour vous, quel est le meilleur afficheur pour une batterie 52v ou meme 48v, j’ai cru lire qu’il avait des valeurs erronés sur certains afficheurs pour une batterie 52v, comme le niveau d’autonomie etc,merci d’avance

    1. Hello,

      I didn’t have any problems with a 52v battery, but I limited the peak current to 18 amps and used pedal assist, not the throttle. Problems seem to occur when you use throttle in full power on steep hills, but on flat roads it’s not so much of an issue.

      The best display would be something like the DPC-18 or P850/P860c I’ve used these with 52v batteries without any problems.

      Regards,
      Tony

  2. Saudações!
    Obrigado pelo conteúdo completo, está me ajudando muito na aquisição e instalação do meu kit bafang. Aqui no Brasil ainda não temos muita informação a respeito de E-bikes.
    Parabéns pelo trabalho!

  3. Hi. I’m asking for advice.
    I have a bafang 750w motor.
    By cycling and selecting the mechanical mode, i.e. the battery is switched off, I feel the pressure on the pedal, the engine hums and whistles faintly, the reverse gear works.
    When I drop the chain, nothing change, the problem is same.

    When I turn on the battery everything is fine.

    Thank you in advance for your advice and answer

    1. Hi,

      Unfortunately it is one of the big downsides to this motor. The pedalling resistance is very noticable when compared with a normal bike or even geared hub motor. The motor doesn’t disengage when switched off, so you feel the resistance. The latest Tongsheng TSDZ2B doesn’t have this problem as they have fitted freewheeling clutch system that disengages the motor. I hope this answers your question.

      Cheers,
      Tony

  4. Is there any way to set the 750 watt 48volt Bafang motor to operate at 240 watt 48 volt to be street legal and at the flip of a switch, or turn of a key, engage the higher power 750 watt’s for off road use???
    The local police don’t seem to check unless you are being a prat/hooligan
    and cycling in a dangerous way, like going much beyond 15 mph in town and 20 mph on country roads!!’
    But it would be nice to be legal.!!’
    At the moment I have a legal front hub motor and the 750 watt on a separate circuit, it does however seem harder to pedal, I think that may have something to do with the Bafang motor dragging when turned off.!!’
    Any advice would be appreciated, and thank you for a very informative site, keep up the good work.!!!’
    Have a virtual pint 🍺 ຈل͜ຈ
    Toodle Pip… ✨🎭✨
    DD…

    1. Hi David,

      The best thing to do would be to get a USB programming lead from Amazon and download the free opensource software. The EggRider display allows you to change programming configuration on the move, so you can have a legal mode and unrestricted mode.

      If you change the maximum current from 25A down to 10A, that will limit your maximum peak power to 480 watts which is roughly the same peak power as a legal 250 watt motor. I used to have my max speed set at 20 mph which is about what a reasonably fit road cyclist can maintain on the flat.

      Unfortunately, the Bafang motor is a pig to pedal without the assist I used to have the lowest setting set to about 100 watts which cancels out the extra weight and resistance of the motor. I hope this helps, let me know if you need any more info.

      Cheers,
      Tony

Leave a Reply

Your email address will not be published. Required fields are marked *